Automatically frames the laminated material. It automates and guarantees the quality of the key process used in solar panel manufacturing. The machine presses the aluminum frame onto the edge of the solar panel structure, and then uses four corner elements to fix the corners.
Take advantage of the combined strength of the working cylinders and the stable steel frame structure Easy and fast to fix the reinforced aluminum frame frames, which saves time and improves product quality
With the rotating wheels, it can guarantee the freedom of the modules in all directions, which protects the module surface, and is convenient to operate
The module consisting of two-way fixed end and two-way action can be suitable for the module to install the frame widely to meet the needs of the industry, and can also meet some non-standard sizes to meet the unique space requirements.
Machine features:
a) Frame pressing, Includes pneumatic pre-pressing rollers. 1-1 fixed side 1-1 pressing side
b) The frame width size is adjustable.
c) Multiple gripping points help to easily and safely press the head during movement
Výroba fotovoltaických strojov
Framing Machine(pneumatic type)FM K115 solar frame assembly station
Frame type:
The corner elements are narrower than the inner groove of the frames, so the press-fit fastening takes place using the pre-punched fastening technology
Specification:
| Cylinders: | Airtag |
| Solenoid valves: | Airtag |
| Maximum frame size: | 2000 X 1100 X 50 (35) mm |
| Minimum frame size: | 350 X 600 X 50 (35) mm |
| Applicable aluminum frame types: | 35 * 50 mm |
| Operating voltage: | 220V / 50Hz |
| Air consumption: | 0.7-0.8Mpa, |
| Air flow: | 5L / min |
| Power: | 0.1 KW, AC230V / 50Hz |
| Dimensions: | 3000 * 1700 * 1000mm |
| Weight: | 1500 kg |
Sun simulator ( tester) FM B335 Solar sun simulator power testing station
| Spectrum range | Meet IEC60904-9 requirements |
| Lightning | Pulsed Xenon lamp |
| Flash light life | ≥60.000 times |
| Radiation intensity | 100mW/cm2 (Adjustment range 20~120mW/cm2) |
| Correction | automatically corrected for temperature conditions, thus providing a more precise output shift compared to standard conditions |
| Measurement of parameters: | open circuit voltage Voc short circuit current leakage voltage current and voltage at peak power load factor panel temperature |
| Irradiation uniformity | ≤±3% |
| Irradiation instability | ≤±3% |
| Test results consistency | ≤±1% |
| Electrical performance measurement error | ≤±2% |
| Single flash time | 10-30MS adjustable |
| Testing | mono-crystalline silicone, poly-crystalline silicone, amorphous-crystalline silicone solar module |
| Effective measure range | 5-500W |
| Measure voltage | 1-100V(resolution 1mv) |
| Measure current | 100m A～20A(resolution1mA) |
| Test parameters | Isc、Voc、Pmax、Vm、Im、FF、EFF、Temp、Rs、Rsh |
| Spectral range | 280-1900nm |
| Spectral resolution | 4nm (280-1000nm) 10nm (1000-1900nm) |
| Sampling bandwidth | 1.5nm (280-1000nm) 3.8nm (1000- 1900nm |
| Xenon quantity | 2pieces |
| Detectors:: | 512-element UV-enhanced Si photodiode array 256-element TE-cooled advanced InGaAs photodiode array |
| Trigger delay | 0 – 100 milliseconds |
| Trigger gerjesztés | External TTL: ≤5μsec |
| Direction of irradiation | Direct up |
| The light source | 100mW/cm2 (adjustable range: 20~120mW/cm2) |
| Performance test range: | 20W ~ 300W |
| Testing way | 5lines testing |
| Testing time | 5S |
| Testing temperature | 15℃～35℃ |
| Size range | 2100 x 1200 mm |
| Working power | 220V / 50Hz / 2kw |
| Machine dimension | 2630*1420*900mm |
| Weight | 350 Kg |
Equipment Performance
The equipment is specially used in the filtration of solar energy mono-crystalline silicon and the poly-crystalline silicon cell pieces. Through stimulates the solar spectrum lamp-house,carries on the testing and surveys to the cell module related electrical parameter,according to the measurement result classifies the cell piece.
It has unique apparatus of modifying,to input the compensate parameter,it will carries on automatically/manual temperature compensation and compensate with the light intensity,and automatically measures and modifies the temperature. Based on the Windows operation surface,and humanized-design testing software,it records and displays test curve(I-V curve,P curve) and the test parameter(Voc, Isc,Pm,Im,FF,EFF), the test of sequence number is automatically produced and preserved to the assigned folder.
Applicable fields
Testing mono-crystalline silicone, poly-crystalline silicone, amorphous-crystalline silicone solar module.
Technical Features
Solar simulators approximate natural sunlight. To ensure that they meet ASTM and IEC standards, they must be tested in three areas: spectral matching, spatial uniformity and temporal stability Spectral matching classifies a solar simulator based on the amount of light (irradiance) it emits and assigns an A, B or C status based on performance measurements at wavelengths of 400-1100 nm With the lighting testing machine, we offer a solution that can reach a panel capacity of up to 120 MW! The XENON lamp is very reliable, allowing multiple flashes. The tester does not just flash once and give a result, but repeats this 5 times. It creates an average of these repeated flashes, the result of which is much more accurate than that of a single test flash. The advantage of this version is that it takes less time to determine these five test results than if there were only a common base flash result for just one test cycle